AC and air duct mold in Wilmington, NC
Air conditioners run hard and make a lot of condensate in a humid climate. A clogged drain line, a leak or a damp air handler can grow mold that spreads odors through the house.
Call (855) 671-5199We are a referral service. An independent local company does the work.
Signs to look for
- A musty smell when the AC starts
- Visible growth on vent covers, registers or around the air handler
- Water around the air handler, or a full or rusted drain pan
- Ceiling stains below the air handler or ductwork
- Rooms that stay damp even with the AC running
Do this first
- Turn the system off at the thermostat if you see significant growth or water.
- Check the condensate drain line and pan for clogs and standing water.
- Do not use a household cleaner or spray inside the ducts.
- Change the filter, and note how long it had been in.
- Call an HVAC technician for the equipment, and a mold professional if there is growth.
What a professional usually does
The CDC advises that after a flood, the heating and cooling system should be inspected and cleaned by a professional with mold experience before it is turned on. A technician will check the coil, drain, pan, ducts and the area around the air handler. Mold in ducts may require a company that does both HVAC and mold work, and they should fix the moisture source.
For more, see the EPA guide to mold and moisture.
Insurance and cost notes
Angi lists air ducts at $600 to $2,000 and HVAC systems at $3,000 to $10,000, depending on the equipment. Costs vary widely, so get a written estimate and ask what is included.
In the Wilmington area
Coastal humidity makes condensate a daily issue, so drain lines clog more often. An annual AC service, clean filters and a clear drain line are the cheapest prevention.
Common questions
Can mold grow in air ducts?
It can when moisture gets in, for example from condensation, a clogged drain line or a leak. Because the system moves air through the house, growth in it can spread odors and spores.
What does it cost to clean mold from air ducts or an HVAC system?
Angi lists $600 to $2,000 for air ducts and $3,000 to $10,000 for HVAC systems overall, depending on whether it is a furnace, air handler or air conditioner. Costs vary widely.
Should I run the AC if I see mold on a vent?
Running the system can move spores around the house. Turn it off if you see significant growth and have it inspected. A professional should assess the system, not a general cleaner.
How do I prevent mold in the AC system?
Keep drain lines clear, change filters on schedule, fix leaks and keep indoor humidity under control. The EPA suggests below 60 percent, ideally between 30 and 50 percent.
Have this ready when you call
- Your town and ZIP code, and whether you own the home (this service is for homeowners; if you rent, tell your landlord or property manager first)
- Where the problem is (room, crawl space, attic, AC closet) and roughly how large it is
- What you see or smell, and how long you have noticed it
- Whether the water source has been stopped, and when the water event happened
- Photos on your phone, taken before you touch anything
- Your insurance company, if you plan to make a claim
Having this ready usually makes the call shorter and the estimate more accurate.
Found mold or a leak? Call and we will connect you with an independent local mold remediation or restoration company, day or night, subject to availability.
Call (855) 671-5199Calling is free. Ask the company for an estimate before work begins.