How to prevent mold in a humid climate
You cannot change the weather, but you can control the moisture that gets inside. The EPA calls this the key to mold control.
Call (855) 671-5199Aim for the right humidity
The EPA says to keep indoor humidity below 60 percent, ideally between 30 and 50 percent. A small hygrometer costs little and shows the reading in each room. Wilmington's average outdoor relative humidity is 74 percent (NWS), so indoor control takes effort.
Care for the AC
- Have the system serviced regularly and keep the condensate drain line clear.
- Change filters on schedule.
- Watch for water around the air handler or a ceiling stain below it.
- Use a dehumidifier in damp rooms or if the AC does not keep up.
Check the usual spots
- Under sinks, around toilets and behind the washing machine
- Around the water heater
- The crawl space entrance and vapor barrier
- Attic and ceiling stains after rain
- Window sills and exterior walls for condensation
Ventilate wet rooms
Use bathroom fans during and after showers, and a vented range hood when cooking. Make sure dryers vent outside.
Fix leaks fast
The EPA advises drying water-damaged areas and items within 24 to 48 hours to prevent mold growth. Do not wait on a small leak.
Manage water outside
- Keep gutters clear and downspouts discharging away from the house.
- Grade soil so water flows away from the foundation.
- Check the crawl space after heavy rain.
A simple seasonal checklist
| When | Do this |
|---|---|
| Spring | Have the AC serviced, clear the condensate drain line, check the roof and flashing, look in the crawl space after heavy rain |
| Summer | Check indoor humidity weekly (August averages 80 percent outdoors), run a dehumidifier in damp rooms, clean bath fan covers |
| Before hurricane season (it starts June 1) | Clear gutters and downspouts, find your main water shutoff, take dated photos of each room for insurance, know who you would call |
| After any storm | Check ceilings, attic and crawl space, and dry anything wet within 24 to 48 hours |
| Winter | Check for condensation on windows, look for new ceiling stains, make sure the dryer and bath fans vent outside |
After a storm
If water got in, dry it within 24 to 48 hours. If you cannot, the CDC says to assume mold is growing. See our first-24-hours checklist.
Sources: EPA, NWS Wilmington, CDC.
Common questions
What indoor humidity should I aim for?
The EPA says to keep indoor humidity below 60 percent, ideally between 30 and 50 percent.
How do I measure humidity?
A small hygrometer from a hardware store shows relative humidity. Check rooms that feel damp, such as bathrooms, closets and the lowest level.
What are the most common causes?
Leaks, a clogged AC drain line, poor ventilation in bathrooms and kitchens, a wet crawl space and clothes dryers or vents that discharge indoors.
How fast do I need to dry things?
The EPA advises drying water-damaged areas and items within 24 to 48 hours.
Found mold or a leak? Call and we will connect you with an independent local mold remediation or restoration company, day or night, subject to availability.
Call (855) 671-5199Calling is free. Ask the company for an estimate before work begins.