Home Mold inspection

Mold inspection in Wilmington, NC

An inspection looks for where mold is, how far it spread and why it is there. It is most useful when you can smell mold but not see it, or after water damage inside walls or floors.

Call (855) 671-5199

We are a referral service. An independent local company does the work.

Signs to look for

Do this first

  1. Note where the smell is strongest and when it is worst (after rain, when the AC runs, in the morning).
  2. Look at the usual sources: under sinks, around the water heater, the AC drain pan, window sills and the crawl space entrance.
  3. Do not disturb suspect areas. Cutting into walls or scrubbing can spread spores.
  4. Write down any past leaks, repairs or storm damage to tell the inspector.
  5. Ask whether sampling is included, and whether the inspector also does remediation.

What a professional usually does

Bob Vila describes an inspection as a professional assessment of where mold is likely to be and which tests to run, taking about 2 hours for a basic inspection and up to 6 for a detailed one. Inspectors often use a moisture meter, and may use a thermal camera to find damp areas behind surfaces. You should end with a written report that says what was found and what is recommended.

The EPA says that in most cases, if visible mold growth is present, sampling is unnecessary.

For more, see the EPA guide to mold and moisture.

Insurance and cost notes

Bob Vila gives a national average of $656 and a typical range of $299 to $1,014 for an inspection, and says a whole-house inspection usually runs $300 to $1,000. Angi lists $300 to $1,025. See the inspection and testing cost guide. Insurers do not always pay for inspections, so ask yours.

Not sure what you are dealing with? Call and describe it. Call (855) 671-5199

In the Wilmington area

In a humid coastal market, many inspections are about hidden moisture: a crawl space, an air handler, a bathroom exhaust or a slow roof leak. Ask the inspector what the moisture readings are, not just whether mold was found.

Common questions

What does a mold inspection include?

Bob Vila describes an inspector assessing where mold is likely to be and which tests to run, taking about 2 hours for a basic inspection and up to 6 for a detailed one. Ask whether sampling is included in the price.

How much does a mold inspection cost?

Bob Vila gives a national average of $656 and a typical range of $299 to $1,014, and says whole-house inspections usually run $300 to $1,000. Angi lists $300 to $1,025.

Should the inspector also do the cleanup?

The NC Department of Health and Human Services advises against hiring a consultant who also provides remediation services, and suggests using separate firms for investigation and remediation, to avoid a conflict of interest. Whatever you choose, get the scope in writing.

Do I need an inspection if I can see mold?

Not always. The EPA says that in most cases, if visible mold growth is present, sampling is unnecessary. An inspection is more useful when you smell mold but cannot find it, or after water damage inside walls or floors.

Have this ready when you call

Having this ready usually makes the call shorter and the estimate more accurate.

Found mold or a leak? Call and we will connect you with an independent local mold remediation or restoration company, day or night, subject to availability.

Call (855) 671-5199

Calling is free. Ask the company for an estimate before work begins.

Call (855) 671-5199